Advertisement
3. Weighing with tare
Place the tare on the platter.
Press the Tare key, the tare weighing will be set.
The weighing display will be marked on "0".
The designator will be marked "net".
Place the commodity into the tare.
After "stable" is marked on, read weighing value.
Remove the commodity.
Remove the tare and press the Tare key.
4. Counting mode
The possible counting quantity shall be 10, 20, 50, and 100.
Please refer the table 1-1.
MODE Press the key. (Count)
SET Press the key. (Set 10)
Place 10pcs of samples which are need to be measured.
After the "Stable" is marked on, press the Set key.
*
When the "SET 20" or above quantity is marked on, the total sample
weighing is smaller. So, more quantities are needed.
Start to count.
*
The set sample's weighing will be saved in the memory, it can be
memorized even when the mode is changed or the power supply is off.
When the power is on, the previous counting mode can be set automatically.
Advertisement
