iBaby M2 Quick Start Manual

M2 Quick Start Guide
Includes:
1 iBaby Monitor M2
1 Magnetic Base
1 Power Adapter
1 Mounting Kit
1 Quick Start Guide
Getting Started
[diagram]
Easy Setup
To successfully complete the setup, you must follow the steps accordingly:
STEP 1
1. Make sure that your iOS device is connected to your preferred Wi-Fi
network.
2. From the App Store, download the "iBaby View" app. Note: for iPad users,
switch to "iPhone Only" mode to download the app.
3. Open the app and create a new account.
STEP 2
1. Follow the on-screen instructions:
a. Click the list icon on the top left
your camera model (M2).
b. Click Next.
2. On App, Step 1:
a. Connect the power adapter to the back of the camera and to a power
outlet.
b. Press the power button and wait to hear a "beep" sound; or until the
green LED light on the back stops flashing. This may take 15-20
seconds.
c. Click Next.
3. On App, Step 2:
a. Connect your iOS device with the camera via USB cable.
b. When you see the message "Share your Wi-Fi Settings", click "Allow".
, select "Add Camera", then select