Table of Contents
Advertisement
Playing Arpeggio (Arpeggiator)
4
Press [EXIT] to return to Performance mode.
5
Press [STYLE] to light up the button and then press [VALUE
select a Rhythm Style.
The Rhythm Style number is shown in the display.
6
Press [4/R] while pressing [ON] to light up [4/R].
The Part 4 is set for the arpeggio play.
7
Press [EXIT].
8
Press [1]–[3] to choose a Part you want to play in arpeggio.
The button of the selected Part blinks.
9
Press [EXIT] while pressing [PATCH/PERFORM], getting both buttons
to blink.
The unit is in the Part Assign mode.
10
Select a Patch for the Part you selected in step 8.
1. Press [BANK], and then press [1/A]–[4/D].
2. Press [1/A]–8/R] to select a Patch number.
The Patch number is shown in the display.
11
Press [EXIT] to return to Performance mode.
12
Press [STYLE] to light up the button, and then press [VALUE
select an Arpeggio Style.
The Arpeggio Style number is shown in the display.
13
Press the Part button that was selected in Step 8 while pressing [ON]
to light up the Part button.
The selected Part is set for arpeggio play.
14
Use the Preview function (p. 21), or a MIDI keyboard to play some
sounds.
The rhythm pattern and arpeggio start playing.
40
/ ] to
See "About Rhythm Styles"
(p. 75) for details on Rhythm
Styles.
See "Selecting the Patch for
Each Part (Part Assign
Mode)" (p. 71) for details on
the Part Assign mode.
/ ] to
See "About Arpeggio Styles"
(p. 75) for details on Arpeggio
Styles.
Advertisement
Table of Contents
