Listening To The Preset Sounds - Roland SH-32 Owner's Manual

Listening to the Preset Sounds

The SH-32 comes with 128 different Preset Patches, so you can immediately enjoy
having a wealth of sounds at your fingertips.
fig.004
1
1
Press [BANK].
[BANK] lights up, and [1/A]–[4/D] and [8/R] blink.
2
Select a bank.
Press [1/A]–[4/D] to select a bank ("A" through "D").
The selected bank is shown in the display.
fig.005
Bank
3
Select a Patch number.
Press [1/A]–[8/R] twice to select a Patch number ("11" through "88"). Press the first
button to enter the 2nd digit of the number. Then press another to enter the first digit
of the number.
The selected Patch number is shown in the display.
4
Use the Preview function (p. 21), or a MIDI keyboard to play some
sounds.
The selected sound will be heard.
2, 3
Patch number
Producing Sound
See "Patches (A11–D88)" (p.
45) for detailed information
about the Patches.
"A11" through "B88" are User
Patches, "C11" through "D88"
are Preset Patches. When
shipped from the factory, the
User Patches are the same as
the Preset Patches.
Display
In step 1, if all of the buttons
from [1/A] through [8/R] are
blinking after you press
[BANK], you will need to press
[PATCH/PERFORM] to turn
them off, then press [BANK]
again (Patch mode p. 20).
In step 2, you can select a
Rhythm Set by pressing [8/R]
(p. 25).
When a Patch number is
shown in the display, you can
also press [VALUE
select a preset sound.
/ ] to
23