Furuno GP-1871F Installation Manual page 22

APPENDIX 1 MENU TREE
1
Routes Routes End Route Notification (ON, OFF)
Keep Destination (ON, OFF)
Circle Radius (NM) (0.01 to 0.54, default: 0.054)
Route Planning Speed (kn)(0.2 to 194.2, default: 5)
XTD Value (NM) (0.01 to 0.54, default: 0.054)
Delete All Routes (Select Yes/No from pop up window)
Easy Routing Safe
Navigation
*: Available when Respect
Draft is set to ON
Restore Restore Default Settings (Select Yes/No from pop up window)
Defaults
Points Points Display Points (Name and Icon, Icon)
Point Size (Small, Standard, Large)
Default Point Symbol (Select from:
Default Point Color (Select a color)
Zero Handling (Zero Padding, Zero Suppress)
QP (Zero Padding, Zero Suppress)
Delete All Points (Select Yes/No from pop up window)
Restore Restore Default Settings (Select Yes/No from pop up window)
Defaults
Map Map Language (English, others)
Icon Size (Small, Normal, Large)
Place Names Size (Small, Normal, Large)
Zoom
Boundaries
and Grids
Chart Color Scheme (Day, Night, Sunlight, Classic, NOAA)
Nav Aids Display (US, International)
Display Display Mode (Off, Full, Medium, Low, Custom)
Mode Marine Objects (ON, OFF)
Nav Aids Objects (Off, Icon, Icon + Name)
Light Sectors (ON, OFF)
Underwater
Objects
Land Objects (ON, OFF)
VAD Objects
Depth
Settings
User Objects
1 2
AP-2
Depth (ft) (3.3 to 66, default: 7)*
Height (ft) (7 to 164, default: 39)
Corridor (ft) (66 to 1640, default: 131)
Time Out (1 min, 5 min, 10 min, 20 min)
Safe Margin (ON, OFF)
Respect Draft (ON, OFF)
, , , , , , , ,
, , , , , , , )
Show Range Slider (ON, OFF)
Chart Lock (ON, OFF)
Lat/Lon Grid (ON, OFF)
Boundaries Mode (Full, Auto, Off)
VAD Boundaries (ON, OFF)
Rocks (Icon, Icon + Depth)
Obstructions (Icon, Icon + Depth)
Diffusers (Icon, Icon + Depth)
Wrecks (Icon, Icon + Depth)
Display Limit (ft) (0 to 997.4, default: 32.8)
Standard land VAD (ON, OFF)
Standard marine VAD (ON, OFF)
High Res Fishing Bathymetry (ON, OFF)
Shading Mode (Normal, Safe, Range Dynamic,
Range Dynamic Invert)
Shade Depth Range (ft) (0 to 1000, default: 65.6)
Min Range (ft) (0 to 32801.8)
Min Range (ft) (0 to 32801.8, default: 32.8)
Tracks (ON, OFF)
Marks (ON, OFF)
Waypoints (ON, OFF)
1 2
Mode (2D, 3D)
Chart
Aspect Layer (Vector, Shaded Relief, Satellite, Raster Chart)
Mode Layer Transparency (0% to 100%, default: 50%)
Layer Overlay (No Raster Layer, On Land, On Sea, On All)
3D Exaggeration (Level 1 to Level 5)
Restore Restore Default Settings (Select Yes/No from pop up window)
Defaults
Interface NMEA0183 Monitor (Display only)
NMEA2000 Monitor (Display only)
NMEA0183 Baud Rate (4800, 38400)
Setup Format (Ver. 2.0, Ver. 3.0, Ver. 4.0, Ver. 4.1)
Select Position & SOG/COG (Internal GPS, NMEA0183, NMEA2000 Auto)
Input
Depth (Internal FF, NMEA0183, NMEA2000 Auto)
Device
Water Temperature (Internal FF, NMEA0183, NMEA2000 Auto)
STW (Internal FF, NMEA0183, NMEA2000 Auto)
Heading (NMEA0183, NMEA2000 Auto)
Air Temperature (NMEA2000 Auto)
Humidity (NMEA2000 Auto)
Wind Chill Temperature (NMEA2000 Auto)
Dew-point Temperature (NMEA2000 Auto)
Air Pressure (NMEA2000 Auto)
Wind (NMEA0183, NMEA2000 Auto)
AIS (NMEA0183, NMEA2000 Auto)
DSC (NMEA0183, NMEA2000 Auto)
Rudder (NMEA0183, NMEA2000 Auto)
Rate of Turn (NMEA0183, NMEA2000 Auto)
Pitch & Roll (NMEA0183, NMEA2000 Auto)
Target Information (NMEA0183, NMEA2000 Auto)
Select Output NMEA2000 PGN (ON, OFF; Default for 127505 (Fluid Level) is OFF)
Select Output NMEA0183 Sentence (ON, OFF)
Calibration Depth (ft) (-65.6 to 65.6, default: 0)
Water Temperature (°F) (-36 to 36, default: 0)
Air Temperature (°F) (-36 to 36, default: 0)
Speed Through Water (-50% to 50%, default: 0%)
Heading (-180° to 180°, default: 0°)
Wind Speed (-50% to 50%, default: 0%)
Wind Damping (s) (0 to 12, default: 3)
Wind Angle (-180° to 180°, default: 0°)
COG Damping (s) (0 to 12)
Restore Default Settings (Select Yes/No from pop up window)
Fish
Color Day (White, LightBlue, DarkBlue, Black, Monochrome)
Finder
Schemes
Night (White, LightBlue, DarkBlue, Black, Monochrome)
Display
Echo Colors (8, 16, 64)
Zoom Range Slider (ON, OFF)
Picture Advance (STOP, 1/16, 1/8, 1/4, 1/2, 1/1, 2/1, 4/1)
Display
Zero Line
Zero Line Rejection (ON, OFF)
Zero Line Range (ft) (4.6 to 8.2, default: 6.6)
Bottom Range
Upper Limit (15% to 75%, default: 70%)
Shift Area
Width (5% to 15%, default: 10%)
1 2
AP-3
APPENDIX 1 MENU TREE
Temperature Graph (ON, OFF)
Zoom Marker (ON, OFF)
A-Scope Peak Hold (ON, OFF)
Color Bar (ON, OFF)