Table of Contents
Advertisement
Detailed Settings for Each Function ([EDIT] Button)
Changing the Pitch
(Coarse Tune/Fine Tune)
This sets the pitch of the Tone.
Parameter
Value
-48–+48
Coarse Tune
(+/- 4 octaves)
-50–+50
Fine Tune
(+/- 50 cents)
1 cent = 1/100 semitone
With some Tones, there may be ranges in which
NOTE
the pitch does not change as intended.
Changing the Bend Range
(Bend Range)
This sets the amount of pitch change that will occur when you
move the Pitch Bend lever (2 octaves).
Parameter
Bend Range
0–24 (semitone)
70
Description
Sets the sound's pitch
in semitone units.
Sets the sound's pitch
in units of one cent.
Value
Making the Settings for Each
Zone Individually
(Zone Parameter)
You can make more detailed settings for the Zone.
Press the ZONE SELECT button to select the Zone
to be set.
Setting the Transposition for Each
Individual Zone (Transpose)
You can perform with each Zone transposed to a different
pitch.
When multiple Tones are playing, you can create a richer
sound by setting the two Tones to different octaves. Also, if the
keyboard mode is set to Split and you are playing a bass Tone
in the lower Zone, you can use the Transpose function to play
the bass at a lower pitch.
Parameter
Transpose
You can also set the same degree of transposition
for all parts with the [TRANSPOSE] button. For
details, refer to "Transposing the Key of the
Keyboard ([TRANSPOSE] Button)" (p. 32).
Setting the Pan (Pan)
Sets the panning (localizes sound image) for each of the
Zones.
The Pan setting localizes the sound image of each Zone when
the output is in stereo. With an increase in the value for L,
more of the sound will be heard as coming from the left side.
Similarly, more of the sound will originate at the right if the
value of R is increased. When set to 0, the sound is heard as
coming from the center.
Parameter
Pan
Value
-48–0–+48
Value
L64–0–R63
Advertisement
Table of Contents
