Mitsubishi SL1U Service Manual page 18

13. Removal of LAMP BOX ASSY
1. Remove the Top Case Assy and the Terminal Board
following "1.Removal of TOP CASE ASSY and
SPEAKER". (Fig. 3-1)
2. Remove the Terminal Assy (MAIN PCB ASSY, INLET
PCB ASSY, and TERMINAL PCB ASSY) following
"4.Removal of TERMINAL ASSY (MAIN PCB ASSY,
INLET PCB ASSY, and TERMINAL PCB ASSY) ".
(Fig. 3-4)
3. Remove the Optical Unit following "8. Removal of
OPTICAL UNIT". (Fig. 3-8)
4. Remove the two (a) screws and the Lamp Box Assy as
shown in Fig. 3-13.
Lamp Box Assy
- 16 -
Optical Unit
a x2
Fig. 3-13