Changing The Amount Of Surround Accomp - Roland KR-15 Owner's Manual

Chapter 1 Performance

■ Changing the Amount of Surround Accomp

1.
Press the [Surround] button and watch the indicator light up.
2.
Touch <Surround Accomp> to display the Surround Accomp screen.
3.
Touch <Options>.
4.
Touch the "External" and "Internal" sliders to adjust the volume levels
of the external speaker and the KR's speaker.
The Surround Accomp (Accompaniment) volume is adjusted.
When you touch <Exit>, you return to the Surround screen.
❍
Selecting the tone to which the effect is applied
With "Keyboard" in Surround set to On, you can select the parts to which the
surround effect is to be applied.
1.
Press the [Surround] button and watch the indicator light up.
2.
Touch <Surround Accomp> to display the Surround Accomp screen.
3.
On the Surround Accomp Screen, touch <Option>.
Touch
fig.d-adv3dopt.eps_60
4.
Touch <All Parts> or <Layer Part>.
Display
The effect is applied to all tones played with the keyboard (the left-
All Parts
hand tone, right-hand tone, and layer tone).
The effect is applied only to the layer part.
When not using a layer performance (p. 30), the Surround effect is not
Layer Part
applied to the keyboard performance, even if <Keyboard> on the
Surround Accomp Screen is set to On.
When you touch <Exit>, you return to the Surround Accomp Screen.
36
to switch the screen.
Explanation
You can use the Memory
Backup function to store these
settings to the KR (p. 164).