Turning Off The Beat Indicator (Beat Indicator); Remembering The Settings Even When The Power Is Turned Off (Memory Backup) - Roland KR-15 Owner's Manual

Chapter 9 Various Settings
3.
Touch the name of the stored image data.
When you touch <Preview>, you can then show the
selected image data on the display selected in Step 1.
4.
Touch <Save>.
The selected image data is stored.
5.
Touch <Exit> to return to the previous screen.
To clear the stored image data, touch <Erase>.
❍ Image data that KR can display
320 x 240 pixels (for KR display)
Size
640 x 480 pixels (for external display)
Color 1/4/8 bit (2/16/256 colors)
BMP format
Format
* The KR cannot deal with compressed
image data.
1–8 characters in length (lowercase is ok). A
filename extension of ".BMP" (uppercase
characters) must be added after the name.
The following characters can be used to
name an image.
A B C D E F G H I J K L M N O P Q R S T U
Name
V W X Y Z a b c d e f g h i j k l m n o p q r s
t u v w x y z 0 1 2 3 4 5 6 7 8 9 # $ % & ' ( ) -
@ ~ { } ^ _ !
* If you use a character that cannot be used
in a name, it will be replaced by another
character when displayed.
164
■ Turning Off the Beat Indicator
(Beat Indicator)
The beat indicator normally flashes in time with the
metronome, Music Style, or song tempo. However, if you
wish, it can be set to remain off at all times.
At step 3 in "Procedure" (p. 161), touch <Beat Indicator>.
A screen like the one shown below appears.
fig.d-memory.eps_50
Touch to turn the setting ON, or OFF (so the beat
indicator remains off).
■ Remembering the Settings
Even When the Power is
Turned Off (Memory Backup)
Normally, the various settings revert to their default values
when the power is turned off. However, you can specify that
the settings will be remembered even when the power is
turned off. This function is called "Memory Backup."
→ For more on the settings stored using Memory Backup, refer to
"Parameters Stored in Memory Backup" (p. 200).
At step 3 in "Procedure" (p. 161), touch <Memory Backup>.
A screen like the one shown below appears.
fig.d-memory.eps_50
Touch <Execute>.
The confirmation message appears on screen.
Touch <OK> to store the setting.
When the setting has been stored in memory, the previous
screen will reappear.
* Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR's
internal memory, making it unusable.