Page 1
HID driver) HID driver) Virtual com (serial port replacement) – use Intermec driver Video + virtual COM – use Intermec driver HID POS – use Intermec driver IBM JavaPOS hand-held – use Intermec driver IBM JavaPOS table-top – use Intermec driver...
Cable (P/N 0-366031-00) – energy saver Direct Bluetooth connection to Yes, via Bluetooth radio built into host PC or Host computer via Intermec Bluetooth to USB adaptor (P/N 203-771-001) or via Intermec Bluetooth to RS-232 serial adapter (P/N 203-768-001) Connection to SmartWedgeLite, the...
Functionality/Feature ScanPlus 1800 SG20 BASE STATION (CONT’D) On-line scanner configuration through the base station Configuration of the base station via the scanner On-line configuration of the base station Non-skid rubber feet Dimensions, base (L x W x H) 8.4 cm (3.3 in) x 8.5 cm (3.4 in) x 10.6 cm (4.2 in) 13.1 cm (5.2 in) x 9.9 cm (3.9 in) x 10.6 cm (4.2 in) Weight, base 280 g (9.88 oz)
Page 4
8K scans from 70% capacity charge cycle Battery life (number of charge cycles) Between 500 and 1000 depending on usage Will retain 70% capacity @ 300 cycles Is battery user-replaceable? Yes, by trained personnel only or at an Intermec Service Center...
Page 5
Functionality/Feature ScanPlus 1800 SG20 POWER (CONT’D) Power requirements, base station 5V / 0.5A power supply 5V / 0.5A power supply Power consumption, corded scanner S1800 VT: 140mA (average) and 40mA Corded versions @5V DC continuous (stand by) scanning: 120mA for SG20T1D, 330mA for SG20THP MISCELLANEOUS Full setup with EasySet...
This manual is also suitable for:
Scanplus 1800vtScanplus 1800srScanplus 1800pdfScanplus 1800vtpdfScanplus 1802srScanplus 1802st...
Show all