Changing The Metronome And Rhythm Volume - Roland HP-7/3 Owner's Manual

Changing the beat of metronome
3
Hold down the [
button.
The currently selected beat will be displayed.
If you hold down the [
the beat will change.
If you hold down the [
simultaneously, the beat will go back to what it was before you changed it.
fig.disp-beat
Display
2.2
0.4
2.4
3.4
4.4
5.4
Stopping the metronome
4
Once again press the [
dark.
The metronome will stop.

■ Changing the metronome and rhythm volume

The volume of the metronome and rhythm (p. 20) can be adjusted, with eight volume
levels available.
1
While holding down the [
button.
The currently specified volume will be displayed.
Continue to hold down the [
to sound the metronome or rhythm, and change the volume.
fig.disp-metrovol
(Rhythm)/Beat] button, and press the [+] or [-]
(Rhythm)/Beat] button and press the [+] or [-] button,
(Rhythm)/Beat] button and press the [+] and [-] buttons
beat Display
2/2 6.4
Only weak beats 7.4
2/4 3.8
3/4 6.8
4/4 9.8
5/4 12.8
(Metronome)] button, getting its indicator to go
(Metronome)] button, press the [+] or [-]
(Metronome)] button, and press the [+] or [-] button
Chapter 2. Performance
beat
6/4
7/4
3/8
6/8
9/8
12/8
NOTE
It is not possible to change the
beat during song playback or
recording.
Correspondence between
beat and tempo display
Beat Tempo Value
2/2 =10–125
x/4 =20–250
x /8 =40–500
This is set to "4" when the
instrument is turned on.
19