Summertime; Block/Unblock Print Triggering - Reiner jetStamp 790 Operating Manual

Hide thumbs Also See for jetStamp 790:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 50
jetStamp 790/790 MP

3.8. Summertime

Proceed as in menu access (see page 49).
Press [NEXT] until "SUMMERTIME" appears.
f
Press [VARY].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
0 = No summertime change
1 = European summertime change from 1996
2 = European summertime change prior to 1996
3 = American summertime change
To move directly to the next menu item,
f
press [RETURN] once.
– or –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.

3.9. Block/unblock print triggering

Blocking print triggering protects against unintentional or unwanted printing.
If print triggering is already protected by a password, this has to be entered.
The factory-set password is 2468.
Proceed as in menu access (see page 49).
Press [NEXT] until "BLOCK IMPRINT 0/1/2/3" appears.
f
Press [VARY].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
0 = No print blocking
1 = Print blocking after 60 seconds
2 = Print blocking after 30 seconds
3 = Print blocking after 15 seconds
To move directly to the next menu item,
f
press [RETURN] once.
– or –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
74

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jetstamp 790 mp

Table of Contents