Error Message - Roland AT800 Music Atelier Owner's Manual

Error Message

Error Message
Copy Protected.
To protect the copyright, this music file cannot be saved as SMF format.
Can't Save.
The protect tab of the storage media is set to the Protect (write prohibit) position.
Write-Protected
Media.
Move the tab to the Write (write permit) position and try the operation again.
Can't Save
You can only play the music data. It cannot be saved on a storage media.
This Song.
This storage media does not allow initialization or saving. Insert a different storage media and try the
Master Disk
operation again.
Read Only File.
You cannot overwrite-save or delete a file on this storage media.
No Media
Storage media is not connected. Please connect storage media.
Saving is not possible because the storage media does not have enough space. Please use other storage
Media Full
media that has been formatted by the ATELIER.
Unknown Media This storage media cannot be used. Please format it.
Media Ejected The storage media was disconnected while it was being accessed. Please try the operation again.
Damaged Media A damaged area was found on the storage media.
Can't Read This data cannot be read.
Playback was halted because the song could not be read fast enough.
Can't Play The song could not be read from the storage media fast enough for playback. Press the [Reset] button, then
press the [Play/Stop] button once again.
There is no Rhythm in user memory.
No Rhythm
The Rhythm used by the selected Registration was deleted from user memory, or its order was changed.
When calibrating the touch panel, the appropriate point was not touched correctly.
Designated
positions are If you touch a location other than the specified point, the discrepancy may become severe.
incorrect.
Please be sure to touch the correct point.
The song data is excessively large, and cannot be loaded.
Memory Full The performance data is excessively large, and cannot be loaded.
Recording or editing is not possible because the memory of the ATELIER is full.
The ATELIER cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the
MIDI Buffer Full
amount of MIDI data sent to the ATELIER.
A MIDI cable or computer cable has been disconnected. Connect it properly and securely.
Communication
Error
The ATELIER is unable to handle the data that was sent. Please send data that the ATELIER is able to handle.
A MIDI
transmission error Data transfer failed. Please transfer the data again.
has occurred.
An error occurred in internal memory. Please perform the operation again. If this indication appears even
Memory Error
after you've repeated the operation several times, please contact Roland service.
Not found
A Rhythm or Registration that meets the conditions was not found.
This is registration
data of a type that This instrument cannot use this Registration.
is not supported.
The Ext Memory
port was subjected
USB memory not supported by the ATELIER was connected. This USB memory cannot be used with the
to excessive
ATELIER.
current.
Meanings
271