Correct Timing Inaccuracies (Quantize) - Roland AT800 Music Atelier Owner's Manual

Editing Your Musical Performance Data
9.
Touch < > <
at which copying will begin).
10.
When you're done making the settings, touch
<Exit>.
11.
Touch the "For" value (the number of
measures to be copied).
12.
Touch < > <
measures to be copied).
If you want to specify all of the data up to the final
measure, select "ALL."
13.
When you're done making the settings, touch
<Exit>.
14.
Touch the "To" value (the copy-destination
measure number).
15.
Touch < > <
destination measure number).
If you select "END," the data will be copied following
the end of the last measure.
16.
When you're done making the settings, touch
<Exit>.
17.
Touch the "Time" value (the number of times
that the data will be copied).
18.
Touch < > <
of times that the data will be copied).
19.
When you're done making the settings, touch
<Exit>.
20.
Touch <Execute>.
The following display appears.
fig.08-24.eps
To cancel operation, touch <Cancel>.
21.
Touch <OK> to copy the measures.
Once the measures have been copied, you are returned
to the Copy screen.
196
> to set "From" (the measure
> to set "For" (the number of
> to set "To" (the copy-
> to set "Time" (the number
Correct Timing Inaccuracies
(Quantize)
You can correct for timing discrepancies in a recorded
performance by having the music be aligned with a timing you
specify. This is called "Quantizing."
For example even if you intend to play at quarter-note timing,
the notes may be slightly earlier or later than precise quarter-
note intervals. In this case, if you quantize at quarter-note
timing, you can correctly match the Rhythms.
1.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.08-02.eps
2.
In the Rec/Play screen, touch <
to open the Utility screen.
fig.08-03.eps
3.
In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
fig.08-08_50
> (Utility)