Side Panel; Rear Panel; Bottom Panel - Roland TD-4 Owner's Manual

Side Panel

fig.SideP.eps
15. MIDI OUT connector
Use this when you want to use the pads to play external MIDI
sound sources or for recording with sequencers (p. 41).

Rear Panel

fig.RearP.epss
18 19
18. DC IN jack
Connect the included AC adaptor here (p. 9).
19. TRIGGER INPUT connector
Connecting the special cable connects the pads and pedals
to the TD-4 (p. 8).
20. OUTPUT jacks (L/MONO, R)
All sounds of the TD-4 are output here. Use for connecting to
an amp or other external audio equipment.
If you're working in mono, only use the L/MONO jack.
15
16. MIX IN jack
17. PHONES jack
fig.BottomP.eps
20
21. Sound module mounting plate attachment holes
22. Security Slot (
16 17
For connecting an external audio source such as MP3 or CD
players (p. 16). All sound input here is also sent from the
OUTPUT and PHONES jacks.
* To adjust the volume, use the controls of the external device
connected to MIX IN.
For connecting stereo headphones (p. 9).
Using the headphone jack will not mute the main OUTPUT
jacks.

Bottom Panel

Attach the included sound module mounting plate here so
that you can attach the TD-4 to your drum stand.
)
http://www.kensington.com/
Panel Descriptions
21 22
7