Chap1.Attention - USCutter LaserPoint 2 Operation Manual

 Ensure the supply voltage varying within the range of ±10%, otherwise a
voltage stabilizer must be used.
 Please don't place any small iron-magnetic subject near the carriage.
 Prevent from dropping foreign matters into cracks such as pins, little screws,
etc.
 Please pull down the power plug if not using during a long time.
 Don't pull the cable with power when it is connected to the computer.
 Don't press the pinch roller on the grit roller, if it is not used.
 Always connect the power cord to a grounded outlet.
 Don't push the carriage.
 Don't contact the carriage or the roller when the machine is working.
.
Chap 1 Attention
Operation Manual
-１-