Event recording
By default if an event happens such as a sudden impact, high speed driving, an aggressive
turn or an accidental crash the G sensor will prompt the recorder to start recording the
event.
If you want to manually start an event recording while continuous recording is in
progress, press MENU.
To stop event recording and resume continuous recording, press REC/OK.
Camera mode
The recorder allows you to take a snapshot by the following two methods:
While the recording is in progress press MODE to capture a still picture from the video
clip.
Press REC/OK to stop recording and then press MODE once to switch to the Camera
mode. In Camera mode press REC/OK to take a 4-Megapixal photo.
Playback mode
1. Press REC/OK to stop recording, and then press MODE twice to switch to the Playback
mode.
2. Use the
/
button to select the desired video type: Event recording (
Normal recording (
3. Use the
/
button to browse the playback list. Press REC/OK to select the desired
file.
4. Press REC/OK again to start playback.
5. During playback, you can:
Press REC/OK to pause and resume the playback.
Use the
/
), and then press REC/OK to enter the playback list.
button to change the playback speed (2x~32x).
8
en
) or