3. Press REC/OK to complete calibration.
G-Sensor Setting: Sets the sensitivity level (Off, High, Medium or Low) of the G sensor
that allows automatical triggering of the event recording while continuous recording is
in progress.
System settings
Language: Sets the language.
Driver ID Setting: This option allows you to enter the driver's name.
1. Use the
/
2. Press MODE to switch to the next field and repeat the step until all fields have been
completed.
3. When done, press REC/OK.
Date/Time: Sets the system date and time.
1. Use the
/
2. Press MODE to switch to the next field and repeat the step until all fields have been
completed.
3. When done, press REC/OK.
LCD Standby: Selects Off to keep the LCD on; or sets the timer for the LCD to turn off
automatically (15 sec, 30 sec or 1 min) after recording starts.
Power-off Delay: The recorder can be set to turn off in specified time (10 sec, 30 sec or
1 min) after power-off. Selects Off to turn it off immediately after power-off.
Beep: Enables or disables system notification sounds.
Format: Formats a memory card. (All data will be erased.)
Default Setting: Restores system settings to factory defaults.
Version: Displays the software information.
button to select the desired characters.
button to adjust the value of the selected field.
10
en