Connector; Fan Power Connector: Sysfan1; Gpio Connector: Jgpio1; Serial Ata Connector: Sata1, Sata2 - MSI MS-98H3 Manual

MS-98H3

Connector

Fan Power Connector: SYSFAN1

The fan power connector supports system cooling fans with +12V. When con-
necting the wire to the connectors, always note that the red wire is the positive
and should be connected to the +12V; the black wire is Ground and should be
connected to GND. If the motherboard has a System Hardware Monitor chipset
onboard, you must use a specially designed fan with speed sensor to take ad-
vantage of the fan control.

GPIO Connector: JGPIO1

This connector is provided for the General-Purpose Input/Output (GPIO) periph-
eral module.

Serial ATA Connector: SATA1, SATA2

This connector is a high-speed Serial ATA interface port. Each connector can
connect to one Serial ATA device.
Important
Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss
may occur during transmission.
2-7