Table of Contents
Advertisement
POWER PRODUCTS
1 Quick Start
1.1 Overview
The TS8000x is a power transmitter communications and control unit for wireless
charging applications. The TS8000x can support power outputs up to 40W+, and
supports Qi® compliant, PMA compliant and proprietary applications. The TS8000x
can be configured to drive single or multi-coil applications, in half and full-bridge
systems.
We provide a GUI running on PC which allows customer to configure and calibrate
parameters of the Tx board. This quick start chapter will show you how to connect
your TS80000 Tx board to PC in the simplest way.
Figure 1: TS80000 Tx board
1.2 Connect to PC GUI
Follow below procedures to connect the Tx board to GUI.
1. Connect Tx board micro USB to PC.
2. Run GUI "TS8XGUI"
Mode = BOOTLOADER, Com = USB-HID, Check Status Every 100ms
Status is "Disconnected" now
Rev 1.2
TS8X Series Device GUI Loaded Device
© 2015 Semtech Corp.
4 of 12
User Manual
www.semtech.com
Advertisement
Table of Contents
