Using Additional Handsets - BT Everyday Phone Quick Setup And User Manual

Using additional handsets

If you've bought a Everyday Phone
multiple pack, any additional
handsets come pre-registered to the
base. However, if you purchase an
additional handset separately, you
must register it to your Everyday
Phone base before it can be used.
Register an additional handset
1. Press and hold the
on the base for 5 seconds. The base
is entered into registration mode.
You will hear a confirmation tone.
2. Press , scroll
REGISTRATION and press
3. Enter the 4 digit PIN and press
The default system PIN is 0000.
4. Once registration is successful the
handset will show HANDSET X (with
X being the next assigned handset
number).
De-register a handset
1. Press , scroll
and press .
until DELETE HS is
2. Press
displayed and press
3. Enter 4 digit system PIN and
press .
34
button
to
.
to BS SETTINGS
.
You can register up to five
GAP compliant handsets to
your Everyday Phone base to
extend your phone system
without needing to install
telephone extension sockets
for each new phone.
If a handset becomes
un-registered it will need
to be registered to the base
again.
If registration isn't successful
the first time, please try again
in case the base registration
period ran out of time.
If there are already five
handsets registered to the
base, the registration will fail.
You must de-register another
handset before you can
.
register the new one.
Registering another
make of handset to your
Everyday Phone base
If you want to register another
make of handset (i.e. not a
Everyday Phone handset) to
your Everyday Phone base
you will need to follow the
Registration instructions that
came with the handset first
and then continue with the
base part of the registration
procedure.
Please note that registering
other types of handset
will only provide limited
compatibility i.e. you may
only be able to make and
receive calls on the additional
handset.