Instructions Specific To Hazardous Area Installations (Reference European Atex Directive 94/9/Ec, Annex Ii, 1/0/6) - Siemens Echomax XPS-15 Quick Start Manual

Echomax xps series ultrasonic transducers
Hide thumbs Also See for Echomax XPS-15:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Instructions specific to hazardous area installations
(Reference European ATEX Directive 94/9/EC, Annex II, 1/0/6)
The following instructions apply to equipment covered by certificate number
SIRA 99ATEX5153X.
1)
For use and assembly, refer to the main instructions.
2)
TheXPS-10 and XPS-15 are certified for use as Category 2GD while the XPS-30 is certified
for use as Category 2G 1D per SIRA 99ATEX5153X.
3)
The equipment may be used with flammable gases and vapors with apparatus group IIC,
IIB, and IIA, and temperature classes T1, T2, T3 and T4.
4)
The equipment has a degree of ingress protection of IP67 and a temperature class of
T135 C and may be used with flammable dusts.
The equipment is certified for use in an ambient temperature range of –40 C to +95 C.
5)
6)
The equipment has not been assessed as a safety related device (as referred to by
Directive 94/9/EC Annex II, clause 1.5): see
on page 3.
7)
Installation and inspection of this equipment shall be carried out by suitably trained
personnel in accordance with the applicable code of practice (EN 60079-14 and EN 60079-
17 in Europe).
8)
The equipment is non-repairable.
9)
The certificate numbers have an 'X' suffix, which indicates that special conditions for safe
use apply. Those installing or inspecting this equipment must have access to the
certificates.
10) If the equipment is likely to come into contact with aggressive substances, then it is the
responsibility of the user to take suitable precautions that prevent it from being adversely
affected, thus ensuring that the type of protection is not compromised.
- Aggressive substances: for example, acidic liquids or gases that may attack
metals, or solvents that may affect polymeric materials.
- Suitable precautions: for example, establishing from the material's data sheet
that it is resistant to specific chemicals.
Page EN-4
XPS Series Transducers – QUICK START MANUAL
Pressure Equipment Directive, PED, 97/23/EC
A5E32282889

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Echomax xps-10Echomax xps-30

Table of Contents