Advertisement
steel screws. They can handle strong torque settings but ideally lower torque setting should
be used to prevent accidents and ensure a proper installation. Textured terminals provide
extra grip on any material, guaranteeing a solid, tight installation.
5-Remove the transparent driver protector and place grille on speakers to complete the
installation. Optional square grille kits are available and need to be added before the speaker
is installed. Consult the SGK square grille kit manuals for installation instructions.
Painting the Grilles
The stainless steels grilles can be painted to suit personal tastes
and match aspects of the décor. The grill incorporates a scrim-
cloth to hide the drivers when installed. This scrim-cloth is
adhered to the grill with a light adhesive and must be removed
before painting but maintains its adhesion qualities and will
reattach once painted. To remove it, gently peel from the small
tab inconspicuously located along the trim.
It is not necessary to paint the speaker cabinet or frame, as the grill will cover the entire baffle.
Ideally the process would be done with spray paint or a spray gun set to a low setting which
lessens the chance of plugging the holes. After the paint is dry, re-apply the scrim-cloth.
www.totemacoustic.com
Advertisement
