Download Print this page

Totem Limited Warranty - Totem Kin IC82 User Manual

Kin architectural series

Advertisement

TOTEM LIMITED WARRANTY

Please register online at www.totemacoustic.com within two weeks of the purchase date.
The Totem speakers must be purchased from a TOTEM AUTHORIZED DEALER.
Keep your original bill or receipt obtained from your Totem Authorized Dealer. Retain the
sturdy carton and all packing material; if needed, it will prove invaluable for damage-free
transport or storage and upgrade purposes.
All Totem products are created with the utmost care and quality in mind. If ever a problem
subwoofers) starting from the date of purchase. The Totem limited warranty applies to
products in normal home use only. The warranty is void if serial numbers have been altered or
removed. The warranty is void if products show signs of abuse. The warranty is void if the
speakers have been tampered with.
Warning / Important technical note
Please read before operating speakers. the warranty on speakers is void if the voice coils are
burned or damaged as a result of overpowering or clipping.
Overpowering: The volume control of most amplifiers and receivers is a logarithmic type,
which means that full rated power may be reached with the volume control at as little as the
halfway point. In addition, operating the loudness feature or boosting the treble or bass
controls increases power output well beyond rated levels. as a result of the above factors, a
30-watt amplifier can produce distorted output levels of over 100 watt and may damage your
loudspeakers.
Clipping: Clipping refers to the power level at which an amplifier begins to distort a
waveform by flattening its top and bottom into a square wave-shape. When fed to tweeters
and/or midrange speakers, this may result in exceeding their maximum power handling
capacity, causing damage to the speaker voice coil. Clipping can be identified by fuzz or
distorted sound. if this is heard, lower the volume immediately to avoid damage to your
system. continuous clipping will damage or burn out the speakers.
The speakers require at least 75-100 hours of actual music playing time as a minimal break-in
period. During this time, refrain from playing them at very loud levels. You will notice a
definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
We reserve the right to any future change or modification without notice
For further assistance, contact your TOTEM AUTHORIZED DEALER or visit the Support Section
of the Totem website at
www.totemacoustic.com/support
www.totemacoustic.com

Advertisement

loading

This manual is also suitable for:

Kin ic81Kin ic62Kin ic61Kin ic62st