Download Print this page

Totem Kin IC82 User Manual page 3

Kin architectural series

Advertisement

Recommended Speaker wire
Length of Run
Up to 75 feet / 22.86 meters
75-200 feet / 22.86 to 60.96 meters
Over 200 feet / over 60.96 meters
Precautions before Installation
Check for obstructions. Use an electronic stud finder to check for ceiling joists, heating and
ventilating shafts, or wall studs that may hinder cutting the required opening or the running
of the cable to your desired location.
In order to ensure proper hole size, attach the cutout template and drill a hole in the center of
the
the middle. Insert in the hole and rotate to check for wires, pipes, studs or other obstructions.
General Placement Guidelines
Always bear in mind that corner locations cause acoustic directionality, limit dispersion and
emphasize low frequencies.
Single speaker stereo applications with the IC62ST:
The stereo IC62ST speaker should be centered on the ceiling, positioned over the intended
listening area. If multiple IC62ST are being used within a room then they can be positioned at
each third of the rooms longest dimension.
Suggested Wire Gauge
16 gauge
14 gauge
12 gauge
www.totemacoustic.com

Advertisement

loading

This manual is also suitable for:

Kin ic81Kin ic62Kin ic61Kin ic62st