Table of Contents
Advertisement
Input WPA-PSK / WPA2-PSK key here. If you wish to change group rekey time
interval, you can change it, but normally you don't need to change it and
software AP will still work fine.
WPA-PSK / WPA2-PSK key must be 8 to 63 ASCII characters or 64 Hex
characters.
When you finish, click right arrow
. After you finish this step, your software
AP is ready and able to accept incoming connection requests.
3-3 Advanced Functionality
To setup advanced software AP functionality, click 'Advanced'
button.
There are several setup items:
Advertisement
Table of Contents
