1. Manuals
  2. Brands
  3. Makita Manuals
  4. Grinder
  5. GD0801C
  6. Instruction manual

Makita GD0801C Instruction Manual

Hide thumbs Also See for GD0801C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
INSTRUCTION MANUAL
Die Grinder
GD0801C
GD0811C
015003
DOUBLE INSULATION
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Related Manuals for Makita GD0801C

Summary of Contents for Makita GD0801C

  • Page 1 INSTRUCTION MANUAL Die Grinder GD0801C GD0811C 015003 DOUBLE INSULATION IMPORTANT: Read Before Using.

  • Page 2: Specifications

    • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003 END202-8 Model GD0801C Symbols The following show the symbols used for the equipment. Sound pressure level (L ) : 80 dB (A) Be sure that you understand their meaning before use.

  • Page 3: Ec Declaration Of Conformity

    EC Declaration of Conformity Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
  • Page 4 15. Do not overreach. Keep proper footing and 26. Follow instruction lubricating balance at all times. This enables better control changing accessories. of the power tool in unexpected situations. 27. Keep handles dry, clean and free from oil and 16. Dress properly. Do not wear loose clothing or grease.
  • Page 5 Wear personal protective equipment. Depending 18. Regularly clean the power tool’s air vents. The on application, use face shield, safety goggles or motor’s fan will draw the dust inside the housing safety glasses. As appropriate, wear dust mask, and excessive accumulation of powdered metal hearing protectors, gloves and workshop apron may cause electrical hazards.

  • Page 6: Functional Description

    Additional Safety Warnings: FUNCTIONAL DESCRIPTION 21. The tool is intended for use with bonded abrasive wheel points (grinding stones) permanently mounted on plain, unthreaded CAUTION: mandrel (shanks). Always be sure that the tool is switched off and • 22. Make sure the wheel is not contacting the unplugged before adjusting or checking function workpiece before the switch is turned on.

  • Page 7: Installing The Side Handle

    1. cause vibration or a broken shaft. Refer to the table for the relationship between the number settings on the dial and the approximate tool speed. GD0801C GD0811C Number (RPM) (RPM)

  • Page 8: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Wheel points • Collet cone set (3 mm, 6 mm, 8mm, 1/4", 1/8") •...
  • Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885367A221...

This manual is also suitable for:

Gd0811c

Table of Contents