Pit Stop And Turbo Timer Modes - Clifford 4811X Owner's Manual

• Engine over-rev protection (Tachometer mode only)

Pit Stop and Turbo Timer Modes

This remote start can keep the engine running during short trips away
from the vehicle or to cool down turbo timers.
Enabling Pit Stop mode:
1. Park in a well ventilated area.
2. With the engine running engage the parking brake and release
the foot brake.
3. Press and release the remote control button once (or the amount
of times the system has been programmed to activate the remote
start). The parking lights turn on as confirmation.
4. Turn off the ignition and remove the key, the engine continues
running.
5. Exit the vehicle, the engine runs for the programmed runtime.
Enabling Turbo Timer mode *:
Begin by following the "Enabling Pit Stop mode" procedure. However,
in step 3, instead of pressing the remote control button, press and re-
lease the dash mounted activation button* once (or the amount of times
the system has been programmed to activate the remote start). The
engine continues running for the shorter Turbo Mode runtime. Continue
and complete the procedure steps.
* Turbo Timer mode must be turned on and an optional activation but-
ton also installed by an authorized dealer.
Note: For Manual Transmission vehicles see "Manual Transmission Ve-
hicles" on page 6.
© 2015 Directed. All rights reserved.
5