Recommended Separation Distances Between Portable And Mobile Rf - Terraillon Tensiosmart User Manual

Table 6

Recommended separation distances between portable and mobile RF

communications equipment and the EQUIPMENT or SYSTEM – for ME EQUIPMENT
or ME SYSTEM that are not LIFE-SUPPORTING
between portable and mobile RF communications equipment at the LS802-B.
The LS802-B is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the LS802-B can help prevent
electromagnetic interference by maintaining a minimum distance between portable and
mobile RF communications equipment (transmittters) and the LS802-B as recommended
below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be determined using the equation applicable
to the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80MHz and 800MHz, the separation distance for the higher frequency range
applies.
NOTE 4 These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
EC REP
Recommended separation distances
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d = 1.167
0.167
0.369
1.167
3.690
11.67
GUANGDONG TRANSTEK MEDICAL ELECTRONICS CO.,LTD
Zone A, 5/F., Investment Building, No. 12, Huizhan East Rd., Torch
Development District, Zhongshan, Guangdong, 528437, China
MDSS - Medical Device Safety Service GmbH
Schiffgraben 41, 30175 Hannover, Germany
80 MHz to 800 MHz
d = 1.167
0.167
0.369
1.167
3.690
11.67
800 MHz to 2.5 GHz
d = 2.333
0.233
0.738
2.333
7.338
23.33
43