Advertisement
Wall-Mount the Switch
1. Locate the two mount holes on the bottom panel of the switch.
2. Locate the M3.5 x 16 mm screws and anchors in the switch package.
3. Mark and drill two mounting holes in the wall where you want to
mount the switch.
The two mounting holes must be at a precise distance of 5.8 in.
(147.5 mm) from each other.
4. Insert the anchors into the wall and tighten the screws with a No. 2
Phillips screwdriver.
Leave about 0.125 in. (about 4 mm) of each screw protruding from
the wall so that you can insert the screws into the holes on the
bottom panel.
5. Line up the holes on the bottom panel with the screws in the wall and
mount the switch to the wall.
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Specifications
Specification
Description
Network interfaces
Eight RJ-45 connectors for 10BASE-T, 100BASE-TX, or
1000BASE-T
Network cable
Category 5 (Cat 5) or better Ethernet cable
Power adapter input
100–240V 50/60 Hz
Power adapter output
12V @ 0.5A
Power consumption
3.1W maximum
Dimensions (W x D x H)
9.22 x 6.46 x 1.29 in. (234 x 164 x 33 mm)
Weight
0.79 lb (0.360 kg)
Operating temperature
32–104°F (0–40°C)
Operating humidity
10%–90% relative humidity, noncondensing
Support
For more information about the switch, visit
www.netgear.com/support/product/GS908.
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support
to register your product, get help, access
the latest downloads and user manuals, and join our community. We
recommend that you use only official NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à http://downloadcenter.netgear.com/other/.
(If this product is sold in Canada, you can access this document in
Canadian-French at http://downloadcenter.netgear.com/other/.)
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/app/answers/detail/a_id/11621.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power
supply.
NETGEAR, Inc.
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
350 East Plumeria Drive
trademarks are used for reference purposes only.
San Jose, CA 95134, USA
November 2017
Advertisement
