NETGEAR Signature GS908 Installation

Installation
8-Port Gigabit Ethernet Unmanaged
Switch with Integrated Cable Management
Signature Series Model GS908
Package contents
Cable Devices and Connect to Power
Router
¾ To set up the switch in your network:
1. Connect one LAN port on the switch to a
LAN port on a router that is connected to
the Internet.
2. Connect your devices to the other LAN
ports on the switch.
Internet
Uplink
P-SCAN
DVD PLAYER
OPEN?CLOSE PLAY STOP POWER
ON/STANDBY
PROGRESSIVE SCAN
Sample connections
3. Connect the power adapter to the switch
and plug the power adapter into an
electrical outlet.
4. Turn on the switch by moving the
OFF/ON slider next to the DC input
connector to the ON position.
GS908 switch
The blue Power LED at the front of
the switch lights and the port LEDs for
connected devices light.