Back Pressure Compensation On / Off Settings - Kanomax 6710 Instruction Manual

Right switch makes the panel tilt up.
Note：
1. The instrument may turn off, when you attempt to adjust the incline
settings of the instrument if the battery display is at
2. You can't adjust the incline settings of the instrument when testing or if
you're not in the main interface.
3. To conserve power，avoid tilting the screen unless necessary.

4.6 Back Pressure Compensation On / Off Settings

Turn the Back Pressure Compensation ON: Flip the switch ① to the down position until it is
locked. Make the back pressure plate parallel with the matrix plane.
Turn the Back Pressure Compensation OFF: Flip the switch ① to the up position until it is
locked. Make the back pressure plate vertical against the matrix plane.
1.800.561.8187
①
①
①
www.
Left switch makes the panel tilt down.
Back Pressure Compensation ON
Back Pressure Compensation OFF
information@itm.com
.com
9
.