Charging; Intelligent Memory Circuit; Overheat Protection; Usage And Maintenance - Fenix UC52 User Manual

battery status percentage, and then goes out in 5 seconds.

Charging

④
Plug the USB side of the charging cable into the any USB power supply, uncover the anti-dust cap
of the light. And plug the Micro USB side of the charging cable into the charging port of the light.
When charging the OLED screen will display , and current battery level will be displayed.
When the light is fully charged, the OLED screen will display . 5V/2A adaptor is
recommended and the normal charging time is about 4 hours.
Note: 1. Once charging is completed, be sure to remove the charging cable and replace the anti-
dust cap to protect from dust and foreign objects.
2. Recharge a stored light every four months to maintain optimum performance of the battery.

Intelligent Memory Circuit

The light memorizes the last selected brightness level on General mode. When turned on again
the previously used brightness level will be recalled.

Overheat Protection

The light will accumulate a lot of heat when it is working at Turbo mode. When the light is
overheated up to 65 or above, the output will be automatically downshifted to half of turbo
℃
to reduce the temperature, and the screen will display Level 5 -.

Usage and Maintenance

Disassembling the sealed head can cause damage to the light and will void the warranty.
◎
The flashlight may flicker, shine intermittently or even fail to illuminate for the following
◎
reason:
A: Poor battery level.
Solution: Charge the light in time
If the above methods don't work, please contact your authorized distributor.

Included

UC52 flashlight, Micro USB charging cable, holster, lanyard, user manual, warranty card

Warning

This flashlight is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the flashlight
directly into anyone's eyes.