Verifying The Installation - Compaq AlphaServer DS20 Configuration Manual

Verifying the Installation

1. Power up the system to the SRM console prompt, P00>>>.
2. Enter a show device command to verify the SCSI configuration.
P00>>> show device
dka500.5.0.7.1 DKA500
dkb0.0.0.8.1 DKB0
dkb100.1.0.8.1 DKB100
dkb200.2.0.8.1 DKB200
dva0.0.0.0.0 DVA0
pka0.7.0.7.1 PKA0
pkb0.7.0.8.1 PKB0
P00>>>
NOTE: You must configure RAID devices with the RAID
configuration utility to see the new configuration.
AlphaServer DS20 Ultra SCSI Configuration Guide 11
RRD46 1337
RZ1CB-CS 0844
RZ1CB-CS 0844
RZ1CB-CS 0844
SCSI Bus ID 7 5.57
SCSI Bus ID 7 5.57