General
Do not allow this radio to be exposed to water, steam or sand. Do not
leave your radio where excessive heat could cause damage. It is recom-
mended that the DAB band be used wherever possible as better results
in terms of quality and freedom from interference will usually be obtained
than on the FM band.
•
The name plate is located on the bottom panel.
Specifi cations
Power Requirements
Mains
AC 230 volts, 50Hz
Battery (Remote control)
2 x AAA size
Frequency Coverage
FM
87.5-108MHz
DAB
174.928 - 239.200MHz
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Circuit Features
only
Loudspeaker
Output Power
Headphone socket
Line in socket
Digital optical output socket
Aerial System
2 x 76 mm
3W into 4 ohms
3.5mm dia
3.5mm dia
FM
Wire aerial
DAB
Wire aerial
32