Advertisement
Available languages
Available languages
Mounting and electrical connection
•
The both, as a transportation protection in the front grid put the parts of styrofoam, remove .
•
The quartz heater must be installed only in a horizontal position on the wall. Do not install on the ceiling or
vertically or on wall sockets. Do not use the heater when it is in uneven position.
•
During installation respect the minimum distances indicated in Fig. 1.
•
To be able to fasten the quartz heater to the wall, both lateral clamping screws must be loosened for the
swivelling hinges something (Fig. 2). Loose the both screws to remove the console-cover. Now you can enlarge
the angle of traverse and tip the quartz heater forwards.
•
Taking into account the fewest distances (Fig. 1) marks the bores for the dowels.
Distance of the bores 260 mms and insert the dowels (Fig. 3). Fix now the quartz heater with the dowel screws at
the wall.
Connect the cable to the free terminals on the appliance. Use the enclosed cable-coupling and plug in following
way: Put the cable-coupling in the circular console hole at the side of the connection. Put the plug in the other
circular console hole. Fix the cable in the connection-terminal.
You must fit a separate device at last at 3mm range for each terminal.
For example: switch – circuit protection – switch – protection with a recognizable coordination.
•
The connection of the protective conductor is absolutely necessary for safety reasons and must be performed
correctly. Please observe the European standards and conditions.
Caution: Ensure that you do not strip too much of the power cable to prevent any wires from touching the screws.
•
After the heater was mounted on the wall, you can lift the heater, attach and fix the console-cover.
Now the connection space is covered with it. The swivel area of the upper part is limited to approx. 30° angle.
Convenient angle to the tilting put and fix the mechanism to the swivelling by tightening both screws (s. Fig. 2).
Now you can use the quartz heater.
Advertisement
