Related Manuals for HELLER HWH2000
Summary of Contents for HELLER HWH2000
- Page 1 CERAMIC WALL HEATER WITH LED DISPLAY 2000W USER MANUAL Model Numbers: HWH2000 BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
-
Page 2: Important Safeguards
IMPORTANT Read and follow the instructions in this user manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information. - Page 3 • Do not use the appliance outdoors. • Do not use if you have wet or damp hands. • Never use the appliance on or near hot surfaces. • Do not operate the product if it is dropped, damaged or showing signs of product malfunction. •...
- Page 4 • Do not use the heater in areas such as garages where petrol or other flammable substances are used or stored. Do not use the heater when flammable sprays, liquids, solvents and glues or flammable fumes may be present. • Keep combustible materials such as furniture, pillows, bedding, clothes and curtains at least 1m away from the appliance.
-
Page 5: Getting Started
GETTING STARTED Before first use • Unpack: This product has been packaged to protect it against transportation damage. Unpack the appliance and keep the original packaging and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. - Page 6 the length of the bare parts should be 10 mm. 4. Mount the fan heater to the wall . Make sure the two holes located on the back of the heater do aim at the above two screws, then push the heater backwards to the wall, and then downwards till the unit is stable.
- Page 7 FAN AND HEATING (BY CONTROL PANEL) Step 1: Press the button to select one of the following mode Touch the One Times the fan working without heating. Touch the two times the fan+ Heating working on Half power. ( 1000W) Touch the three times the fan+ Heating working on Full power.
- Page 8 • Press again to switch off the appliance. Stops by going into standby (the fan stops 30 seconds after the stand-by). TEMPERATURE CONTROL (ONLY BY REMOTE CONTROL) • Press to switch on the remote control. • Press + or – to set the setting temperature from 10°C to 49°C(the light °C is on).
- Page 9 Turn-off in timer off running mode • Press to set the timer off time in 1-12 hours (the light is on). • When the appointment power-off time arrived, the product will automatically turns off. The default setting temperature is 23°C. •...
- Page 10 SETTING THE WEEKLY PROGRAM (ONLY BY REMOTE CONTROL) The current time must be set before any programming. • Press to switch on the appliance. 1. Press P to enter into weekly program setting (the light P is on). 2. Press DAY to set the day of program activation (d1, d2,d7...). 3.
-
Page 11: Remote Control
If open-window mode and weekly timer program are on simultaneously, if the appliance turn off in weekly time, the appliance is not turned on. If it already turn on in weekly timer, the appliance working as the setting temperature under open-window mode. For example: when window open detection function is on, the weekly working time already setting before: it's Monday morning A.M 9:00--10:00, desired temperature 28 degree, the window open model means is only working A.M 9:00--10:00, the unit will cut off when temperature reduce to... -
Page 12: Specifications
CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of the heater. Warning: In order to avoid overheating, do not cover the heater. WARNING - Fabric, clothing or other flammable materials may ignite if placed against or in close proximity to the heater.