Download Print this page

Safety Informations - HELLER QS 180 Operating And Mounting Instructions Manual

Electric quartz heater

Advertisement

Available languages

Available languages

Please pay your attention to the following points before using the quartz heater. These instructions for use belong to
the appliance and must be kept in a safe place. When changing owners, these instructions must be surrendered to
the new owner!

SAFETY INFORMATIONS:

Before you use the device pay attention to following:
The appliance must only be used as described in the instructions for use.
Use for any other purpose is inadmissible! Any damage attributed to incorrect operation, improper use
or non-observance of the safety information will invalidate all liability and the warranty!
Please read the operating instruction carefully before using the heater, and keep them for future consultation.
Never use the appliance as a heater for a baby or nappy changing table.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. The supervisors are
subject to a special duty of care when using radiant heater.
Children should be supervised to ensure that they do not play with the appliance.
Check that the voltage on the rating label is the same as that in your home.
Use the quartz heater only for 230 volts AC.
To ensure a proper installation, the installation must be carried out by a skilled worker.
The quartz heater must be fixed at the wall in horizontal position. The device may not be fixed on walls of
plastic, synthetic material or other easily flammable materials as for example wood, panels, paper or similar.
By disregard it can come to the fire risk!
Keep away the heater from inflammable materials such as carpets, curtains, plastics etc. and keep to distance
of at least 150 cm between front grid and flammable subjects in the radiation area.
Never use the heater without supervision!
This heater must be mounted such that the control elements cannot be touched by persons who are in a bath,
shower, or any other water-filled receptacle.
Pull-switch only by vertical pulling downwards operates.
The heater warms itself up during longer operation strongly – therefore front-grid and quartz-tubes
does not touch.
Pay attention to that the heater is also still hot on cut-out still some time.
Important! Do not insert any foreign objects into the appliance openings or do not insert any objects into the
heater! Risk of injury (electric shock) and damage to the appliance! Never place any objects between
appliance and wall.
Do not cover the heater with clothing, towels or similar to be dried. Overheating and Fire hazard!
Do not use the heater in areas or rooms which are a risk of fire, such as garages, stables, wooden shed etc.
Do not use the appliance in flammable atmospheres (e.g. in the vicinity of combustible gases or sprays cans)!
Explosion and fire hazard!
Do not use the heater in industrial use areas.
Do not use the heater in rooms with explosive gas (e. g. petrol) or while using inflammable glue or solvent
e.
(e. g. when gluing or varnishing parquet floors, PVC etc.) Do not allow aerosols, inflammable substances or
materials sensitive to heat to be in the flow of hot air.
Safety distances according to VDE 0100, part 701 and the regulations of the regional utilities and the
minimum distances according to Fig. 1 are to keep.
IMPORTANT: This heater is strictly being designed for a rigid connection and not for a
flexible cable connection!
The equipment is designed to have a fixed connection with a rigid cable, e.g. a buried wiring
The heater only connect on compact installed lines at least 1,0 mm² (because there is no strain relief).
After installation the device at no place may touch the connecting lead.
The heater must be installed at least 1,80m above the floor (s. Fig. 1).
Do not place the connection cable or pull switch on or around the hot heater.
The heater must not be located immediate below a socket-outlet.
Install the appliance out of the reach of children.
The appliance is not suitable for animal breeding purposes.
Do not use the heater if the connection cable or the heater is damaged or the heater is faulty.
Please contact for repair or replacement of a part an approved service.
Repairs may be executed only by authorized specialized or by our customer service. Improper repairs can
expose the user to considerable danger!
GB

Advertisement

loading