Override Locked Scanner; Unlinking The Scanner - Honeywell Xenon 1932 Quick Start Manual

Override Locked Scanner

If you need to replace a broken or lost scanner that is linked to a
base, scan the Override Locked Scanner bar code with a new
scanner, and place that scanner in the base. The locked link will
be overridden; the broken or lost scanner's link with the base will
be removed, and the new scanner will be linked.
Override Locked Scanner

Unlinking the Scanner

If the base has a scanner linked to it, that scanner must be
unlinked before a new scanner can be linked. Once the previous
scanner is unlinked, it will no longer communicate with the
base. Scan the Unlink Scanner bar code to unlink a scanner.
Unlink Scanner
Trigger
The following bar codes will allow you to use the scanner in
Manual Trigger - Normal Mode (need to press the trigger to
read) or Presentation mode (the scanner is activated when it
"sees" a bar code).
Manual Trigger - Normal
(Default)
10