Advertisement
ACCESS CONTROLS
Wireless Vehicle Sensor
WIRELESS
A
D
E
B
When a VEHICLE SENSOR is in
use, the automatic gate opener
could be activated by a child on
a bicycle, tricycle, or other metal
play equipment. DO NOT ALLOW
UNATTENDED CHILDREN OR
PETS NEAR YOUR AUTOMATED
GATE AT ANY TIME.
Printed in China for Gates That Open, LLC
©2010 GTO
Installation Manual
C
www.mightymule.com • www.gtoaccess.com
Kit Includes:
A. Transmitter Module/Cover
B. Sensor/Sensor Cable
C. Receiver (RB709U-NB required for some
gate openers)
D. Mounting Post (3 pieces)
E. 2 "AA" Batteries
(Note: lithium-alkaline batteries
are recommended for extreme cold climates.)
How it Works:
The electromagnetic sensor detects vehicles in
motion and automatically activates your gate. This
"hands free" device allows friends, family, and
delivery personnel to exit your property without the
need of an Entry Transmitter, or you, to operate
the gate.
ACCESS
SYSTEMS
rev. 10-04-10
Advertisement
Table of Contents
Related Manuals for GTO FM130
Summary of Contents for GTO FM130
-
Page 1: Installation Manual
DO NOT ALLOW UNATTENDED CHILDREN OR PETS NEAR YOUR AUTOMATED GATE AT ANY TIME. www.mightymule.com • www.gtoaccess.com Printed in China for Gates That Open, LLC rev. 10-04-10 ©2010 GTO... - Page 2 After the one (1) year warranty period, GTO will make any necessary repairs for a nominal fee. Call GTO at (800) 543- 1236 for more information. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
- Page 3 TRANSMITTING in the “0” position WIRELESS VEHICLE SENSOR Dual Button Entry Transmitter GTO, Tallahassee, FL USA Transmitter Module 2. Determine Location for Sensor and Transmitter Module NOTE: Install Transmitter Module and Sensor on the same side of the driveway as your automatic gate opener/receiver.
- Page 4 3. Install Sensor and Transmitter Module IMPORTANT: Clear an area 25 ft. in all directions of metal tools, toys, and automobiles to prevent magnetic disturbance during testing and installation. Leave 2" of wire slack inside post. Transmitter Module approximately 12" above ground. Coil extra wire.
-
Page 5: Test The System
IMPORTANT: The RB709U-NB Universal Receiver (included) is designed, and necessary, to work with certain models of GTO/Mighty Mule Gate Opener control boards. Many models do not require the use of the Receiver. To determine if you will need to install the Receiver, remove the gate opener control box cover and examine the control board. -
Page 6: Indicator Light
Instructions for Installing the RB709U-NB Receiver CAUTION: The “Learn” process may activate the gate. Please use caution when programming the Receiver. Step 1: The RB709U-NB will replace the gate opener receiver; disconnect the gate opener receiver’s RED, BLACK, and GREEN wires from the receiver terminals on the gate opener control board. - Page 7 GREEN Control Boards Gate Opener Battery Gate Opener Battery RED WIRE to POSITIVE RED WIRE to POSITIVE BLACK BLACK WIRE to NEGATIVE BLACK BLACK WIRE to NEGATIVE STALL FORCE SEQ1 SEQ2 LEARN COM COM RECEIVER ALARM ACCESSORY RCVR CH 1 (Green Wire to Com CH 1 (Green Wire to Grn) CH 1 (Blue Wire to Cycle) CH 1 (Blue Wire to Wht)
-
Page 8: Troubleshooting Guide
4. Adjust the Sensitivity on the Transmitter Module (page 3). The 24/7 Troubleshooting Wizard is available at http://support.gtoinc.com. If you are unable to solve the problem, call the GTO Service Department at 1-800-543-1236. Gates That Open, LLC 3121 Hartsfield Road • Tallahassee, Florida 32303 Sales: 1-800-543-GATE (4283) •...
Need help?
Do you have a question about the FM130 and is the answer not in the manual?
Questions and answers