Chamberlain MyQ Quick Install Manual

LiftMaster® Quick Install Guide
1
Disconnect Power to the Garage Door
2
Install MyQ®Control Panel
Complete installation guide can be found at:
Alarm.com Dealer Site
Support Documents > Garage
3
Reconnect Power to the Garage Door Opener
4
Connect the LiftMaster Internet Gateway
Green Light indicates the gateway is plugged-in and connected to the Internet.
5
Visit Alarm.com
Customer Site or
Dealer Site
Enable LiftMaster Garage Door Control
add-on for the customer.
Register the Internet Gateway using the
serial number on the back of the unit.
> Support & Sales >
> LiftMaster MyQ Devices.
6
Follow Website
Instructions to
Learn-in the
Garage Door Opener
Press the learn button two times.
7
Confirm
Connection
to Gateway
Yellow light will be replaced by a blue light
to confirm that the opener is connected.
powered by