Richell Pet Stuff Tower Instruction Manual

R
�
Thank you for choosing Richell's Pet Stuff Tower. Please read
this instruction manual carefully before assembling or using this
product. Keep this manual for future reference.
Warnings!
Important
Parts cannot be disassembled once they are snapped together.
To prevent overturning, do not hang heavy contents on side hooks
( Maximum hanging load is 4.4lbs per hook).
To prevent overturning, place heavier contents in bottom container
( Maximum load capacity of bottom container is 8.8lbs).
Do not step on the foot pedal too hard, as it may cause damage to
the main body.
Place the tower on a flat, even surface.
Do not use hooks to move the tower from one location to another.
NOTE :
How to Assemble
Make sure pieces are snapped together properly.
Insert side panels to the the base
as shown.
NOTE :
Left-side panel and right-side panel are different.
Each side panel has a top and bottom: make sure
the hole for the hook is positioned on top of the
side panel as shown.
Hole for the hook
Left-side Panel
Right-side Panel
Base
Pedal
(pre-assembled)
�
660004-REV
Instruction Manual
Insert middle panel to the side
panels as shown.
NOTE :
Middle panel has a rectangular hole.
Middle Panel
Parts / Materials
Top Panel ( 1 )
Middle Panel ( 1 )
SIZE :
W16.7" x D12.8" x H34.1"
Base / Pedal ( 1 set )
( with hooks )
Insert side panels into the grooves
of the middle panel as shown,
making sure the holes are positioned
on the top of the side panels.
Left-side Panel
Right-side Panel
�
Please check parts before assembling.
Hook ( 2 )
Left Panel ( 2 )
Right Panel ( 2 )
Insert top panel to the side panels Place containers, aligned with
as shown. rectangular holes of the middle and
base panels, into each compartment.
Container
Top Panel
How to attach the lid
Snap lid into place at positions (3) shown on
the container below:
Made in the USA
Richell USA Inc.
2100 N. Hwy. 360, Suite 1700, Grand Prairie, TX 75050
Phone (972) 641-9795 Fax (972) 641-8495
www.richellusa.com
Pet Stuff Tower TM
Material : polypropylene
Lid ( 2 )
Container (2)
Please set the hook at an easy-to-use
Hook
position on the tower.
Rectanglar hole
Lid
Container
0804