16
Connecting
OPTICAL In connection
Connect an optical output of Unit (or Digital Device
etc) to the OPTICAL IN connector.
2
Speaker ez(Easy) setup
Listen to sound from TV, DVD and Digital Device
with 2 channel mode.
Even in power off mode, if you press OPTICAL,
then power is on and automatically changed to
AUX OPT mode.
1. Connect the unit's OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.).
2. Select the AUX OPT by using the OPTICAL.
To select the AUX OPT directly.
3. Listen sound with 2 channel speakers.
4. To escape from AUX OPT by using the OPTICAL.
Function is retuned to previous one.
DM2630K-FH_DRUSLLG_ENG.indd 16
To the digital
optical output jack of
your component
Antenna Connection
Connect the supplied FM antenna for listening to
the radio.
Connect the FM Wire antenna to the FM antenna
connector.
,
Note
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
as horizontal as possible.
2013-04-18
2:23:03