Chapter
• The WVL2 Explorer
4
i
4
5
6
7
60 WVL2™ Installation and Setup Manual
NOTE:
If you need assistance updating the firmware, please contact Customer
Support at 1-800-639-6774.
The following message is displayed.
Figure 4.4
Update Firmware Confirmation Message
Click Yes to start the firmware update process.
The process may take a few minutes.
When the process is complete, the following message is displayed.
Figure 4.5
Firmware Update Successful/Power Cycle Message
Click OK the close the message.
Disconnect power to the WVL2 unit.
The following message is displayed.
Figure 4.6
Firmware Update No Longer Detected Message
Click OK to close the message.