NEXIQ Technologies WVL2 Installation And Setup Manual page 29

Table of Contents

Advertisement

Chapter
• Setting Up Wireless Communication
2
11
12
13
i
26 Wireless Vehicle Link 2 Installation and Setup Manual
The Internet Protocol Properties page is displayed.
Figure 2.15
Internet Protocol (TCP/IP) Properties
Click Use the following IP address.
In the IP Address box, type the first three segments of the IP address, as
follows: 192.168.123
Type the last segment of the IP address, using a value between 1 and 100.
For example, a properly configured IP address reads: 192.168.123.75
NOTE:
If setting up multiple PCs, be sure that each PC has a different number in
the last segment of the IP address. For example: PC 1 = 192.168.123.75
PC 2 = 192.168.123.76

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wireless vehicle link 2

Table of Contents