NEXIQ Technologies WVL2 Installation And Setup Manual page 43

Table of Contents

Advertisement

Chapter
• Setting Up Wireless Communication
2
10
11
12
i
40 Wireless Vehicle Link 2 Installation and Setup Manual
The Internet Protocol Version 4 (TC/IPv4) Properties screen is displayed.
Figure 2.30
Internet Protocol Version 4 (TCP/IPv4) Properties
If it is not already selected, click the radio button next to Use the following
IP address.
In the IP Address box, type the first three segments of the IP address, as
follows: 192.168.123
Type the last segment of the IP address, using a value between 1 and 100.
For example, the full address would be 192.168.123.75
NOTE:
If setting up multiple PCs, be sure that each PC has a different number in
the last segment of the IP address. For example: PC 1 = 192.168.123.75
and PC 2 = 192.168.123.76

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wireless vehicle link 2

Table of Contents