Table of Contents
Advertisement
6
Front panel operation
Failure to connect the sense leads in this fashion will severely compromise the performance
of Model 2306 with dynamic loads.
the DUT using a 2-wire local sense configuration.
Figure 5
2-wire local sense connection of the DUT to the output
DVM input
Model 2306
source input/output
Front panel operation
Menu controls
•
•
•
NOTE
Quick Disconnect
Connector
DVM +
DVM -
Source -
Source -
Sense -
Sense +
Source +
Source +
Press the MENU key to activate the main menu.
Use the UP and DOWN keys to scroll through the primary menu items.
Changing channels (Model 2306, 2306-PJ, and 2306-VS only): When the main menu is
displayed, use the
/
keys to change the active channel (each press of the
will toggle between channel #1 and channel #2).
If a channel number is not shown, the LEFT and RIGHT key presses will be ignored.
Also the LEFT and RIGHT key presses will be ignored if a sub-menu only exists on
the battery channel (not on the charger channel).
Figure 5
illustrates the proper connection of the supply to
Twisted pair
External Test Circuit
+
-
DUT
/
keys
Advertisement
Table of Contents
