System expansions
Place the new hard disk drive in the carrier (1) and push it in the direction of
Ê
the arrow (2) until it locks in place.
Press the contact strips into place at both sides of the carrier (3).
Ê
Ê
Secure the hard disk drive with the four screws on the underside of the carrier
(4).
Swing the two locking levers of the carrier outwards as far as they will go, and
Ê
insert the carrier fully into the server (1).
Swing the two locking levers inwards (2) until they lock into place.
Ê
54
Installing and removing a SCSI hard disk drive
1
2
3
4
3
4
2
2
2
1
A26361-K412-Z107-3-7619