Refer to Table 14 "Part numbers for FRUs (CRUs)" on page 43 to look up the Lenovo part number for the
replacement back cover.
Remove the LCD module
Make sure the following FRUs (CRUs) have been removed and the battery connector has been detached.
"Remove the back cover" on page 32
Step 1.
Disconnect the antenna cables and the LCD cable from the system board.
d
Step 2.
Remove the screws.
Table 6. Screw specifications — removing the LCD module
Screw
Quantity
location
Hinges to
6
upper case
Step 3.
Lift up the LCD module to detach it from the upper case.
The LCD module is not a FRU. Instead, it contains FRUs as its components. Refer to "Disassemble the LCD
module" on page 38 if you need to replace a FRU contained in the LCD module.
a
b
c
d
Specifications
M2.5 × 5 mm
.
Chapter 5
Removing a FRU or CRU
33