11. It becomes the following screens.
12. Check once again that a connect RS-232C cable from
unit to PC and turn on the unit.
Type the @RSV:? into the HyperTerminal from the
keyboard, and press the Enter.
If the @RSV:27 is displayed on HyperTerminal, if means
version 27 of software.
11.
次の画面が表示されます。
12.
本機と
PC
が
RS-232
ケーブルで接続され、電源が入って
いることを確認し、キーボードからハイパーターミナル
に
@RSV:?
と入力し、
ハイパーターミナルに
ウェアのバージョンは
34
Enter
を押します。
@RSV:27
と表示された場合、ソフト
27
です。